Posted on

How to Catch Carp in Brays Bayou

How to Catch Carp in Brays Bayou 1


Here is a step-by-step guide on how to catch carp in Brays Bayou.

1. Grab some Ned Rig hooks.

Catch carp Ned Riggs

2. Pick up some wonder bread.

Catch Carp Bread

3. Cut a quarter piece of bread for the hook.

Catch carp bread

4. Fold the bread on the hook and smash it to attach. 

Catch Carp hook

5. Go to Brays Bayou and cast a line.

Catch Carp casting

6. Catch a carp.

Catch carp

Remember to subscribe here for more fishing content!

Posted on

Live Giveaway Drawing!

Live Giveaway Drawing! 2


What's up everyone, Welcome to the Live Drawing Giveaway! Thank you to everyone who entered the drawing.  27 lucky winners will be receiving a full box of lures. Several of you did enter more than once, which is excellent, and I appreciate the enthusiasm. As a reminder, this Giveaway only allows for one winner per prize, so if your name is selected more than once, you will only be receiving one box.

The Giveaway!

Giveaway Drawing

Let's get to it. My chosen recycled drawing bucket for this Giveaway was previously protein powder. I made sure to add everyone's name and email address into the drawing bucket. It took me about an hour, but it was all worth it. Each name selected will be pulled into a separate box. Again, Winners will be receiving a full package of lures. There are 27 boxes with a variety of lures I have purchased at the Houston Tackle Show. Once winners have pulled, I will be sending a follow-up email. Winners should reply to the email with their address to receive their prize.
I will start sending boxes on Saturday.

Our Winners

Giveaway Winner

Eloy Garcia
Daniel Fitzgerald
Joana Garcia
Farhan Syed
Chris Smith aka Adventure Bro
Chandler Farley
Jonnie Hartling
Jimmy D
Addison Barron
Joe Vinsik
Scott Machold
Aaron Grimes
John Fasbender
Carlos Paz
Dante Smith
Joe Aitken
Adam Hagan
Jon Parkoff
Kolton Spinn
Guy Kelly
Donna Wallace
DJ Stone
Anthony Turner
Michael Riddle
Caleb Crung
Nelson Lourinho
David Henriks

No Hard Feelings

For those who only subscribed to enter the drawing, you can unsubscribe directly on the email I send out. If you'd like to continue to receive emails, you can expect emails about new blog posts, the latest videos, lure designs. Overall, your feedback is my guide in creating the most relevant content for 3d printing, lure design, and anything associated.

New Lures

Largest Lure

Finally, here are a few examples of lure prototypes I have been busy working on lately. First up, the giant wake bate. This a two parts design with an open cavity for beads. I am still deciding if the split design will work but think of this design as a big boy for the big boys. I generally throw wake baits in the spring, early summer, or fishing redfish in the flats.

Second, I have a couple of twitch baits, The first is the flat slim, and the other is pretty much its naked brother. I also have swimbaits. Since I decided only to use the lures I have made this year, I needed a quick and dirty paddle tail. Next is a swimbait with a ball tail. As you can tell, it's an awkward name but a great design. I have been producing a lot of lures with ball ends. You can expect these to be pouring in soon.

Thirdly, as fun, as it would be to collab with my local grocery store HEB on their new lure “Ziploc bags,” I am planning to throw these standard angling ai molds. These are angling ai with a 6-inch bait in color dark grey-blue pearlescence. I also have a smaller version in the white shimmer. I typically use these in the winter. Next, I have shrimps, and a bait that I created that did not shoot very well. It's an insane creation with flashing and will be rigged on a ned head. Visually it is like a ned but with a ned fluke-style tail with, again, balls. The hope is when I go after speckled trout and redfish; the fish think it's a dying fish. There's no telling what the bass will think it is, but hopefully, they will find it tasty. At long last, I designed a swimbait that is called the fat pudge. This bait is short and fat but with a hook slot. You can expect new videos about all these lures coming soon. I will be going over the design process and how to 3d print the molds.

Molds

New Molds

Of all the molds I have created, I have successfully designed the largest one to date. I am still tuning the process, but I have to put it in about 50,000 clamps for the three cavity ned rig I printed on my 3d printer to shoot the injection mold. Generally, I use the molds by bolting the two parts together like most standard aluminum molds and then clamp to reduce any leaks. Lastly, I am doing more of a single cavity single shot mold. I typically use the style when creating the pudge swimmer. Shifting my style from multiple cavity molds to single reduces the time and process. Right now, this mold makes the clamping easy and only takes about an hour to print. It also makes shooting even more efficient.

That's all for now. Thank you again to everyone who participated in this Live Giveaway Drawing. Again, all winners should be receiving an email. For more content, be sure to check out my other blogs.

Posted on

3d Printer Heated Enclosure Fast and Easy

3d Printer Heated Enclosure Fast and Easy 3


Winter in Texas means a bone-chilling 50 degrees at night!  This may not be cold for the rest of the world but for us Texans and Resin 3d Printers, it's cold! For today's video, it's time to learn a fast and easy way to create a heated enclosure for your resin 3d Printer. These printers as you know like to print at a high temperature. For best results, you are looking at a temperature of 85 degrees.

To save you the research, I have dived into researching already great DYI methods on YouTube to find the best way to DYI an enclosure for your 3D printer.  What I’ve discovered is that “You need a hot box, Bro!”Let's start by creating something fast and easy.

The first thing I did was purchase a Heated Enclosure by Creality. It easily holds the Elegoo Saturn or any printer similar to that size. Keep in mind, these enclosures are essentially planting boxes used to grown plants indoors. If you need anything larger, go on amazon and search for grow tents. Make sure you can see inside the enclosure, and it's heat resistant. I added a cool RGB light as an add on. It's extra!

3d Printer Creality Enclosure

 

Next, you'll need a heater. I purchased a ceramic heater from Amazon. Remember, larger boxes will require a larger heater.

Lastly, you’ll need a way to control the heater. It is important that you have the ability to set the temperature on and off. Luckily, you can control the heat with a Temperature Probe. These are usually used in gardening and can be hard to understand at first. Once you hit that setup button a few times, you can expect it to work flawlessly.

3d Printer Temperature Probe

To summarize, after this setup, I do not have anymore temperature variation failures and can run my printer inside this enclosure without any issues. You should also see that it cuts down on the fumes as well. This setup only takes 10 minutes and it's super easy! As always, thank you for watching this video, and be sure to like and subscribe to my channel!

Posted on

Houston Urban Fishing Adventure – Big 8lb Carp!

Houston Urban Fishing Adventure - Big 8lb Carp! 4

Urban fishing in Houston has a lot of advantages, with access being the biggest one. I only had a few hours between errands around Houston today so I decided to hit a local urban pond. This pond has produced fish in the past but never one quite this large.

catching eight pound fish urban fishing houston

The colors on this carp are incredible, and he is absolutely humongous at what appears to be at least eight pounds. My next fish ended up being yet another huge fish, this time a catfish, but it looks like something about this ned rig is working! For this time of year, I assumed most fish would be hunkered down but this has been an incredible day for fishing. My third catch of the day was a pretty hefty catfish, proving that this spot is definitely worth returning to in the future. This was a really nice run for the suppressor and I can't wait to try it out on the saltwater.

The gear I used today was my brand new Old18 Suppressor Light Action Rod paired with my Shimano Stratic 1000HG. This combo is super lightweight but still has enough power to haul in some large fish. I can't wait to get this out and tackle some redfish! When I'm working with my ned rig, I usually take a piece of bread and then pop it through the hook then mash it on the base. Leave the largest piece at the top, and today I'm using fairly old bread so it might not cooperate fully or pop off along the way.

If you want to see another great Houston Urban Angler check out Wild Lifes Youtube channel. He is the master of catching large fish around Houston, especially Braes Bayou. And as always to find more amazing content like you just saw, be sure to like and subscribe to my channel!